High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

Copper(II)-catalyzed ether synthesis from aliphatic alcohols and potassium organotrifluoroborate salts

[reaction: see text] A protocol for the copper(II)-catalyzed etherification of aliphatic alcohols under mild and essentially neutral conditions is described. Air- and moisture-stable potassium alkenyl- and aryltrifluoroborate salts undergo cross-coupling with a variety of aliphatic primary and secondary alcohols and phenols, and are tolerant of a range of functional groups. The optimized conditions utilize catalytic copper(II) acetate with 4-(dimethylamino)pyridine as ligand in the presence of 4 A molecular sieves under an atmosphere of oxygen.     

氮杂冠醚研究Ⅶ、双仲胺型氮杂冠醚对过渡金属离子的选择性萃取作用

合成了五种新型双仲胺型氦杂冠醚，研究了它们对过渡金属离子进行液—液萃取，并用原子吸收法测定其浓度。实验结果表明：这类冠醚对Ａｇ￣＋、Ｐｄ￣（２＋）、和Ｐｔ￣（４＋）等贵金属离子有较强的选择配位性能，对选择性分离这些金属离子有重要的意义。     

硝酸钐水合物热分解过程的研究

Sm(NO_3)_3·6H_2O热分解过程的研究工作虽有文献报道,但结果不尽相同。文献[2]不同于文献[1,3],认为分解过程中存在无水盐阶段;文献[3]不同于文献[1,2],认为分解过程中存在低水合物。而且文献尚缺低水合物热分解机理的报道。我们也曾做过一些工作,但脱水阶段也不详尽。为此,我们详细地研究了Sm(NO_3)_3·nH_2O(n=     

多晶Hg0.09Cd0.91Te薄膜的光电化学行为

富镉Hg_(1-x)Cd_xTe是一种新型的光电转换材料,已用于固体结太阳能光伏电池:ITO/CdS/Hg_(1-)Cd_xTe/Au。我们曾对Hg_(1-x)Cd_xTe的电沉积机理作过研究。最近我们用电沉积制备的Hg_(0.09)Cd_(0.91)Te多晶薄膜做成了液体结太阳能光电化学电池并观察到明显光电响应。     

反相高效液相色谱法测定人血浆中曲尼司特浓度

 报道了用反相高效液相色谱法测定人血浆中曲尼司特浓度。以甲醇－磷酸二氢钾缓冲液（６０∶４０，Ｖ／Ｖ；ｐＨ４．２）为流动相，色谱柱采用ＹＷＧ－Ｃ１８不锈钢柱，紫外３３３ｎｍ波长检测，血浆样品经甲醇沉淀蛋白后直接进样测定。血浆浓度在０．６５～４０ｍｇ／Ｌ范围内线性良好，方法的平均回收率为１００．０％±４．１％。血浆最低检测浓度为０．２ｍｇ／Ｌ。对１０名健康志愿者口服２００ｍｇ曲尼司特后不同时间的血药浓度进行了测定。     

Photodynamic therapy based on organic small molecular fluorescent dyes

This review aims to provide a summary of the progress in organic small molecular fluorescent dyes for photodynamic therapy in recent years and it is classified according to the structures of dyes including cyanines, phthalocyanine, BODIPYs and other agents.     

A radioanalytical technique to study the behavior of organic toxicants applied to a study of the photodegradation of 2,3,7,8-tetrachlorodibenzo-p-dioxin

A general method for tritium labeling of organic compounds by the use of thermal activation of tritium is described. It allows obtaining uniformly tritium-labeled organic compounds with high specific activity (up to 50 Ci/mmol) which permits tracing the majority of the biodegradation products of compounds studied. More than 40 compounds were labeled using this simple, rapid and inexpensive method. Separation of the biodegradation products is performed by thin layer chromatography. Quantification is performed by direct measurement of the radioactivity by liquid scintillation counting after transfer of the layer from TLC plates into scintillation vials, or by densitometry of autoradiographs. The technique is useful for a wide range of organic compounds, including ones with unknown structure, and can be applied to various in vivo and in vitro studies.     

Novel carboxylated oligothiophenes as sensitizers in photoelectric conversion systems

Novel carboxylated oligothiophenes with different thiophene units were designed and synthesized as photosensitizers in dye-sensitized solar cells (DSSCs) for efficient opto-electric materials. The introduction of -COOH into thiophene molecules can lead to a red shift of UV-visible absorption, increase light-harvesting efficiency, and enhance photoinduced charge transport by forming efficient covalent bonds to the substrate surface. A red shift of the absorption spectrum of oligothiophene is also achieved by the increase in the number of thiophene units. The DSSCs based on the oligomers have excellent photovoltaic performances. Under 100 mW cm(-2) irradiation a short-circuit current of 10.57 mA cm(-2) and an overall energy conversion efficiency of 3.36 % is achieved when pentathiophene dicarboxylated acid was used as a sensitizer. The incident photo-to-current conversion efficiency (IPCE) has a maximum as high as 80 %. In addition, photovoltage and photocurrent transients show that slow charge recombination in DSSCs is important for efficient charge separation and excellent photoelectric conversion properties of the oligomers. These initial and promising results suggest that carboxylated oligothiophenes are efficient photosensitizers.